UPVC Soil, Waste & Ventilating (SWV) Pipe Sirim, BBB

RM34.00RM306.00
RM25.50RM229.50

These SWV pipes comply with MS 1063 which are also equivalent to BS 5255, BS 4514, BS EN 1401 and BS EN 1329.

SWV pipe systems are intended to be used for soil and waste discharge pipe work for conveyance of domestic wastewater (low and high temperature), ventilating pipe work and rainwater pipe work within building structure.

Standard: MS1063:2002
Application: Conveyance of Drainage Water

Catalogue: BINA Pipe & Fitting

Brand:
Nominal Size Mena Outside Diameter (mm) Wall Thickness (mm)
Application Area
B BD
In. mm Min Max Min Max Min Max
11/4 36 36.2 36.5 3.0 3.5
11/2 43 42.8 43.1 3.0 3.5
2 56 55.8 56.1 3.0 3.5
3 82 82.4 82.8 3.0 3.5 3.0 3.5
4 110 110.0 110.3 3.2 3.8 3.2 3.8
6 160 160.0 160.4 3.2 3.8 4.0 4.6
8 220 200.0 200.5 3.9 4.5 4.9 5.6
10 250 250.0 250.5 4.9 5.6 6.2 7.1
12 315 315.0 315.6 6.2 7.1 7.7 8.7

Features

1: Light Weight – UPVC’s lighter weight makes it easier and less costly to handle, transport ands install. In fact, most UPVC pipe and fitting sizes can be handled manually, reducing the need for expensive installation equipment.

2: Higher Flow Rates – UPVC pipes provide smoother wall surface that reduce fluid friction and resistance to flow, thus increase flow rates. Superior hydraulics leading to lower pumping costs.

3: Corrosion Resistance – UPVC pipes and fittings are non-conductors of electricity and immune to electrochemical reactions caused by acids, alkalis and salts that cause corrosion in metals.

4: Chemical Resistance – UPVC pipes and fittings exhibit resistance to a wide range of chemical reagents and are resistant to chemicals normally found or used in homes.

5: Flame Resistance – UPVC pipes and fittings are difficult to ignite and will not continue burning in the absence of an external ignition source.

6: Impact Strength – Under normal conditions, UPVC pipes possess relatively high resistance to impact damage when compared to pipes made from clay, concrete and most other conventional materials.

7: Favorable Cost – UPVC pipe and fitting are competitive with other materials, particularly when installation and life cycle operating costs are taken into consideration.

Material
Unplasticized Polyvinyl Chloride (PVC-U)

Recommended Use
Drainage and Non Pressure Application

Joint Method
Solvent Cement

Sizes Availability
36MM ,43MM, 56MM, 82MM, 110MM, 160MM, 200MM, 250MM, 315MM

Length Availability
5.8M

Certification
SIRIM & SPAN

Weight N/A
Dimensions N/A
UPVC Sizes

, , , , , , , , ,

Shopping Cart
%d bloggers like this: